Industrial endoscopic inspection is the most effective and intuitive method of visual inspection. It is an essential and effective tool in environments that are not directly visible to the human eye.

From a professional perspective, endoscopic inspection is a visual inspection method that uses micro camera equipment to evaluate the quality of containers, pipes, the interior of nonremovable equipment, the inner surface of narrow gaps, the parts below the liquid level such as water and oil, and the areas that cannot be directly observed by human eyes under special circumstances. The professional equipment using this visual inspection method is called an industrial endoscope.

Initially, endoscopes were mainly used for medical purposes, also known as medical endoscopes. The industrial endoscope we know today is derived from the medical field.

Shenzhen JEET T51X Series megapixel high-definition industrial endoscope is selected. The detection technology can present the defects at the detection points on the IPS high-definition full view screen with smooth, clear, high-resolution and complete color images, and carry out the intelligent image system analysis on the observation images to visually judge the detection situation.

Industrial endoscope detection is the most effective and intuitive visual detection method. It is an indispensable and effective tool in an environment where human eyes cannot directly observe. The tool videoscope is a kind of industrial electronic endoscope, which is often used in application scenarios with a relatively simple detection environment.

JEET endoscope manufacturer has rich experience and superior industrial endoscopes, which can better communicate with customers. If you want to purchase industrial endoscopes, choose JEET Technology, I believe you will get a satisfactory answer here.

The industrial endoscope is an NDT instrument integrating electronic technology, optics, precision machinery, and micro camera technology,which is mainly used to detect equipment and parts that cannot or are difficult to be observed by the human eye, such as pipes, machinery, and automobiles,which helps the inspector to quickly and accurately identify and judge defects.

According to the requirements of aircraft maintenance manual and airworthiness instructions, industrial endoscope is often required, which is a very intuitive detection method to clarify the status of aircraft.

For food, pharmaceutical and other industries, pipeline system is a very common component, and there are very high cleanliness requirements, unqualified pipeline welding quality and wrong evaluation of high cleanliness, which may lead to high and irreversible costs: bad consequences (even personal injury) caused by contaminated products entering the market

Industrial endoscope is of great significance to the safety and effectiveness of aircraft. Through industrial borescope inspection, the engine disassembly, replacement, transportation and unnecessary shutdown losses are avoided, and the maintenance cost is saved. At the same time, the videoscope observation is intuitive, accurate, easy to operate, and can detect the internal damage of the engine in time.

A widely used visual inspection instrument at present is video endoscope, which is also one of the important methods in non-destructive testing. It is usually used to observe the surface state, alignment of mating surfaces, signs of deformation or leakage, etc., such as parts , components and equipment, etc.

Generally, aircraft engine endoscopy is divided into three types: routine inspection, targeted inspection and expanded area inspection. The importance of industrial endoscope in aero-engine inspection records is mainly reflected in the following three aspects:

The hose endoscope is mostly used in the field of police. It is used for security inspection, explosive disposal, anti smuggling, criminal investigation, search and rescue and other work in major organs and units. It can be used in public security, fire protection, armed police, procuratorate, customs and other organs and units.

Industrial video endoscopes can be used to help human beings expand and improve their visual detection ability, and also bring good news to the fatigue test of civil aircraft. In order to make you better understand, today's editor of Shenzhen Jietai has sorted out the following examples for you. Let's have a look.

At present, a widely used visual inspection instrument is video endoscope, which is also one of the important methods in nondestructive testing. It is usually used to observe the surface state, alignment of mating surface, signs of deformation or leakage, such as parts, components and equipment. There are two methods of visual inspection: direct visual inspection and indirect visual inspection.

What is a pipeline videoscope? In dairy life, we can see pipeline everywhere, no matter is natural gas pipeline,water pipeline, sewage pipeline, pipeline acts an essential role in our lives, and bring convenience. However, if the pipelines have some problems,it is difficult to repair. The pipeline needs a special transportation way, the internal is narrow, and it is difficult to inspect.

Technical performance is vital for an industrial videoscope, and the quality is essential which has a influence to an industrial videoscope to carry out inspection activities.

Based on different manufacturing technique of high precision seamless steel tube, there are different steel tube, such as pipe jacking, extruded tube, and hot rolled pipe.

Casting test is an essential method to find out flaws, and ensure the product quality. Today，there are many methods NDT for casting, the most commonly used is magnetic powder inspection, flurescent penetrant inspection, ultrasonic test, radiographic inspection,etc.

Today, a mobile, Bluetooth, WIFI, NFC plays more and more important role, and it is convenient to people's life. Everyday, we carry out our activities via WIFI both in work and entertainment, and it is also an essential media for us to transfer images, videos or files.

In industrial videoscope industry, the light source is an essential part of of an industrial videoscope. There are 2 main types of light source,LED and optical fiber.

An industrial videoscope is widely used in pharmaceutical industries to ensure the safety of drug production, and is essential for human health, so we will strengthen the oversight and supervision of drug quality. We will ensure workplace safety and reduce the occurrence of major accidents.

Automotive videoscopes are used to check the internal components of automobiles. In automotive industry, for example, videoscopes are used during fixing or servicing of various automobiles in car repair shop.

Nowadays，there are hundreds of videoscope manufacturers, it is vital for a buyer to choose a reliable supplier. There are many characteristics for a reliable manufacturer as the following.

Shenzhen Jeet Technology Co., Ltd, known as JEET VIDEOSCOPE, is a high-tech enterprise, specialize in research and development, production,sales and inspection service of industrial videoscopes.

Advantages of an industrial videoscope

Currently, an industrial videoscope is more and more used in visual testing（VT）, compare to a traditional videoscope, there are advantages as the following.

Generally speaking, Visual Testing (VT) is a kind of visual inspection via human eyes. Currently, an industry videoscope is widely used to provide a VT solution in many industrial fields like Automotive Manufacturing, Precision Casting, Automotive Maintenance, Police security Checking, Aviation and Aerospace Area, Special Inspection Institute,Pharmaceutical Machinery, Material Analysis,Explosion-proof Detection, Power and Energy, Industrial Equipment, Life Environment, Military Industries

With the raising demands of industrial production and the rapid development of technology, industrial videoscope is more and more important in industrial production. An inspector is able to complete the inspection jobs more efficient and effective via correctly using a videoscope.
When an inspector uses a videoscope first time, he or she needs to finish a base operation training before inspection job. Take JEET T51X series videoscope as an example.