With the rapid development of industrial automation, robotics and other industries, the development of turbine and plug engine is also accelerating. Cylinder block is one of the most commonly used and important parts. Correct inspection and maintenance before leaving the factory can reduce the failure rate of cylinder block and improve its service life. It is very important for the normal operation of the whole equipment.

With the development trend of rail transit manufacturing industry, the maintenance quality and efficiency of rail transit vehicles and other mechanical equipment are required to be higher and higher. Due to the characteristics of industrial endoscope nondestructive testing technology, it has become an important testing tool in the industrial field.

With the increasing capacity of single unit of thermal power plant and the increasing pressure of boiler, in order to avoid the safety problems and economic losses caused by foreign matter plugging and explosion, the pipeline inspection in installation and operation of thermal power plant has higher requirements.

Clean pipeline is an important part of medical equipment and technology, and it is an important carrier for the transmission of various media in the process of pharmaceutical production. During the construction of pharmaceutical engineering, the slight carelessness of pipeline welding may cause serious consequences.

Industrial endoscope is a new nondestructive testing instrument which integrates optics, precision machinery, electronic machinery, electronic technology and micro camera technology. Traditional non-destructive testing methods can not detect non-point surface defects. Optical fiber is used to transmit illumination light, micro camera and video signal. After processing and amplification, the video signal is sent to the display for imaging.

In the process of factory production, pipeline transmission is essential, so the daily maintenance is also a work that cannot be careless. But most of the pipes are slender, so it is impossible for human eyes to observe it. At this time, the pipe endoscope is needed to enter the pipeline to help the maintenance personnel work.

The pipeline endoscope is a kind of industrial endoscope which can be more inclined to the pipeline of the detection system. Its pipeline length is more suitable for the detection environment of the pipeline.

With the development of industry, more and more industries need to use industrial endoscope for nondestructive testing. What kinds of endoscopes can be divided into and how to choose industrial endoscope? Next, Shenzhen Jietai technology will give you a brief introduction of industrial endoscope.

As we all know, in the pharmaceutical industry, there are many pipelines in production, and the length of the pipes is generally relatively long, generally several meters or even tens of meters. Before the pipeline installation, to check whether the welding is even and free from any defects, the pipe endoscope is needed to take photos.

Now there are too many industrial endoscopes on the market, and the appearance and other aspects of the problem are almost the same, so consumers must pay attention to distinguish good from bad when buying, otherwise they will be deceived. Next, JEET will discuss how to distinguish the advantages and disadvantages of industrial endoscope.

With the development of industry, industrial endoscope is playing a more and more important role. What is industrial endoscope mainly used to detect? Next, jeet will join us.

With the development of the industrial endoscope industry, more and more capital has joined the social industry of China. There are more and more endoscope manufacturers, and consumers are faced with more choices from enterprises. How to choose reliable brands and products from many endoscope manufacturers has become a hot research topic.

We pipe water, gas, oil and so on every day. Pipelines are buried underground all year round, and when they fail, people don't know anything. Therefore, in order to better serve us, we have set up a pipeline endoscope, which is an auxiliary tool. Its purpose is only to detect the fault of the pipeline. If we want to repair the pipeline, we need professional personnel and equipment maintenance work.

Pipelines are widely used in petroleum, chemical, metallurgy, pharmaceutical, energy and environmental protection industries. In our daily life, tap water, optical cable, sewage, etc. They are closely related to underground pipelines. It can be said that pipelines are indispensable in urban life and industrial life.

Through the network video imaging technology, the industrial endoscope is extended into the object, and then we take a picture of a lens to detect whether there is a problem with the object. But there are some important factors that affect the measurement accuracy of enterprise equipment. What are the specific factors that affect the measurement accuracy of industrial endoscope?

The quality control of casting industry is more and more strict, the requirements of castings are higher and higher, and the output is higher and higher. Traditional industrial endoscope can not meet the needs of detection.

Nondestructive testing technology is an indispensable and effective tool for industrial development, which reflects the industrial development level of a country to a certain extent. As one of the basic technologies of modern industry, NDT technology plays an increasingly important role in ensuring product quality and engineering quality.

Welding technology is an indispensable process in modern industry high quality and high efficiency manufacturing technology. The application of pipeline welding in many welding technologies is of great significance. Pipeline is used to transport various media. As special facilities, welding technology can be seen everywhere: power plant, shipbuilding, chemical company, pharmaceutical equipment, etc.

Nowadays, with the rapid development of industrial technology, many large coal mines, industrial pipelines and oil pipelines will use flexible tube endoscopes. Flexible tube endoscopes are optical, mechanical and electrical NDT instruments.

Industrial endoscope is used in NDT (non-destructive testing) work, now it has been welcomed by industrial manufacturing and maintenance industry.

Pipeline endoscope detection system has been applied in many fields. Special equipment inspection engineer, maintenance engineer, petrochemical power construction contractor, municipal drainage maintenance engineer and plumber often use the excellent design of pipeline endoscope to meet the characteristics of the industry and find out the places where other equipment is difficult to reach or enter

JEET industrial endoscopes can be used not only in factory pipeline inspection and repair, but also in aerospace, anti-terrorism police, automobile maintenance, etc., to achieve rapid inspection and repair in places invisible to human ability, and also make important for visual communication contribution!

Endoscope is a kind of internal surface detection equipment equipped with image sensor, optical lens, light source lighting, mechanical device, etc. It can enter the cavity through various openings, and view the internal condition of the object through the image.

JEET is a national high-tech enterprise specializing in industrial endoscopes. Since its establishment, it has served hundreds of large and medium-sized enterprises at home and abroad, bringing more convenience to customers' inspection work.

The optical fiber endoscope is composed of a certain number of optical fiber bundles. Because the optical fiber is relatively slender, after a long time of bending and use, the optical fiber will be easily damaged and broken, and black spots will appear in the imaging, which affects the endoscope.

Industrial endoscope is a kind of non-destructive testing equipment widely used in industrial manufacturing and maintenance at present. It extends the visual distance of the human eye, breaks through the blind angle of human eye observation, and can accurately and clearly observe the inside of machinery and equipment or parts.

An industrial endoscope is a visual inspection equipment that integrates advanced technologies in various fields such as electronics, optics and hardware. The front end can be bent and manipulated with the probe and pipe section, which can effectively increase the viewing distance and change the direction of the line of sight.

jeet videoscope